The script expects the following files:

[ENGINE]

#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0

[GENERIC]

#Set this to true if you wish to skip software updates
DECLINE_AUTO_UPDATES=true

#My Oracle Support User Name
MOS_USERNAME=

#My Oracle Support Password
MOS_PASSWORD=<SECURE VALUE>

#If the Software updates are already downloaded and available on your local system, then specify the path to the directory where these patches are available and set SPECIFY_DOWNLOAD_LOCATION to true
AUTO_UPDATES_LOCATION=

#Proxy Server Name to connect to My Oracle Support
SOFTWARE_UPDATES_PROXY_SERVER=

#Proxy Server Port
SOFTWARE_UPDATES_PROXY_PORT=

#Proxy Server Username
SOFTWARE_UPDATES_PROXY_USER=

#Proxy Server Password
SOFTWARE_UPDATES_PROXY_PASSWORD=<SECURE VALUE>

#The oracle home location. This can be an existing Oracle Home or a new Oracle Home
ORACLE_HOME=${ORACLE_HOME}

When the install was succesfull it will also copy the file ide.conf to the corresponding folder in the Jdeveloper home, to set proper heapsizes, since the default heapsize of Jdeveloper is quite sparingly. Also it copies the jdev.conf to the proper folder, to have a the Jdeveloper User dirs set to C:\Data\Jdeveloper\SOA. As can be set at the top as well. The rationale for this is to have the Jdeveloper User Dir out side the Windows User Profile, and thus more accessible. Also it allows for having also another Jdeveloper installation that is of the same base version, but does not have the SOA/BPM quickstart add-ons. For instance for plain Java-ADF development.

The used ide.conf is as follows:

#-----------------------------------------------------------------------------
#
# ide.conf - IDE configuration file for Oracle FCP IDE.
#
# Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.
#
#-----------------------------------------------------------------------------
#
# Relative paths are resolved against the parent directory of this file.
#
# The format of this file is:
#
#    "Directive      Value" (with one or more spaces and/or tab characters
#    between the directive and the value)  This file can be in either UNIX
#    or DOS format for end of line terminators.  Any path seperators must be
#    UNIX style forward slashes '/', even on Windows.
#
# This configuration file is not intended to be modified by the user.  Doing so
# may cause the product to become unstable or unusable.  If options need to be
# modified or added, the user may do so by modifying the custom configuration files
# located in the user's home directory.  The location of these files is dependent
# on the product name and host platform, but may be found according to the
# following guidelines:
#
# Windows Platforms:
#   The location of user/product files are often configured during installation,
#   but may be found in:
#     %APPDATA%\<product-name>\<product-version>\product.conf
#     %APPDATA%\<product-name>\<product-version>\jdev.conf
#
# Unix/Linux/Mac/Solaris:
#   $HOME/.<product-name>/<product-version>/product.conf
#   $HOME/.<product-name>/<product-version>/jdev.conf
#
# In particular, the directives to set the initial and maximum Java memory
# and the SetJavaHome directive to specify the JDK location can be overridden
# in that file instead of modifying this file.
#
#-----------------------------------------------------------------------------

IncludeConfFile ../../ide/bin/jdk.conf

AddJavaLibFile ../../ide/lib/ide-boot.jar

# All required Netbeans jars for running Netbinox
AddJavaLibFile  ../../netbeans/platform/lib/boot.jar
AddJavaLibFile  ../../netbeans/platform/lib/org-openide-util-ui.jar
AddJavaLibFile  ../../netbeans/platform/lib/org-openide-util.jar
AddJavaLibFile  ../../netbeans/platform/lib/org-openide-util-lookup.jar
AddJavaLibFile  ../../netbeans/platform/lib/org-openide-modules.jar

# Oracle IDE boot jar
AddJavaLibFile ../../ide/lib/fcpboot.jar
SetMainClass oracle.ide.osgi.boot.OracleIdeLauncher

# System properties expected by the Netbinox-Oracle IDE bridge
AddVMOption  -Dnetbeans.home=../../netbeans/platform/
AddVMOption  -Dnetbeans.logger.console=true
AddVMOption  -Dexcluded.modules=org.eclipse.osgi
AddVMOption  -Dide.cluster.dirs=../../netbeans/fcpbridge/:../../netbeans/ide/:../../netbeans/../

# Turn off verifications since the included classes are already verified
# by the compiler.  This will reduce startup time significantly.  On
# some Linux Systems, using -Xverify:none will cause a SIGABRT, if you
# get this, try removing this option.
#
AddVMOption  -Xverify:none

# With OSGI, the LAZY (ondemand) extension loading mode is the default,
# to turn it off, use any other words, ie EAGER
#
AddVMOption  -Doracle.ide.extension.HooksProcessingMode=LAZY

#
# Other OSGi configuration options for locating bundles and boot delegation.
#
AddVMOption  -Dorg.eclipse.equinox.simpleconfigurator.configUrl=file:bundles.info
AddVMOption  -Dosgi.bundles.defaultStartLevel=1
AddVMOption  -Dosgi.configuration.cascaded=false
AddVMOption  -Dosgi.noShutdown=true
AddVMOption  -Dorg.osgi.framework.bootdelegation=*
AddVMOption  -Dosgi.parentClassloader=app
AddVMOption  -Dosgi.locking=none
AddVMOption  -Dosgi.contextClassLoaderParent=app

# Needed for PL/SQL debugging
#
# To be disabled when we allow running on JDK9
AddVMOption  -Xbootclasspath/p:../../rdbms/jlib/ojdi.jar

# To be enabled when we allow running on JDK9
#AddVM8Option  -Xbootclasspath/p:../../rdbms/jlib/ojdi.jar
#AddJava9OrHigherLibFile ../../rdbms/jlib/ojdi.jar

# Needed to avoid possible deadlocks due to Eclipse bug 121737, which in turn is tied to Sun bug 4670071
AddVMOption   -Dosgi.classloader.type=parallel

# Needed for performance as the default bundle file limit is 100
AddVMOption   -Dosgi.bundlefile.limit=500

# Controls the allowed number of IDE processes. Default is 10, so if a higher limit is needed, uncomment this
# and set to the new limit. The limit can be any positive integer; setting it to 0 or a negative integer will
# result in setting the limit back to 10.
# AddVMOption -Doracle.ide.maxNumberOfProcesses=10

# Configure location of feedback server (Oracle internal use only)
AddVMOption -Dide.feedback-server=ide.us.oracle.com

# For the transformation factory we take a slightly different tack as we need to be able to
# switch the transformation factory in certain cases
#
AddJavaLibFile ../../ide/lib/xml-factory.jar
AddVMOption -Djavax.xml.transform.TransformerFactory=oracle.ide.xml.switchable.SwitchableTransformerFactory

# Override the JDK or XDK XML Transformer used by the SwitchableTransformerFactory
# AddVMOption -Doracle.ide.xml.SwitchableTransformer.jdk=...


# Pull parser configurations
AddJavaLibFile  ../../ide/lib/woodstox-core-asl-4.2.0.jar
AddJavaLibFile  ../../ide/lib/stax2-api-3.1.1.jar
AddVMOption -Djavax.xml.stream.XMLInputFactory=com.ctc.wstx.stax.WstxInputFactory
AddVMOption -Djavax.xml.stream.util.XMLEventAllocator=oracle.ideimpl.xml.stream.XMLEventAllocatorImpl

# Enable logging of violations of Swings single threaded rule. Valid arguments: bug,console
# Exceptions to the rule (not common) can be added to the exceptions file
AddVMOption -Doracle.ide.reportEDTViolations=bug
AddVMOption -Doracle.ide.reportEDTViolations.exceptionsfile=./swing-thread-violations.conf

# Set the default memory options for the Java VM which apply to both 32 and 64-bit VM's.
# These values can be overridden in the user .conf file, see the comment at the top of this file.
#AddVMOption  -Xms128M
#AddVMOption  -Xmx800M
AddVMOption  -Xms2048M
AddVMOption  -Xmx2048M
AddVMOption  -XX:+UseG1GC 
AddVMOption  -XX:MaxGCPauseMillis=200
# Shows heap memory indicator in the status bar.
AddVMOption -DMainWindow.MemoryMonitorOn=true 

#
# This option controls the log level at which we must halt execution on
# start-up. It can be set to either a string, like 'SEVERE' or 'WARNING',
# or an integer equivalent of the desired log level.
#
# AddVMOption   -Doracle.ide.extension.InterruptibleExecutionLogHandler.interruptLogLevel=OFF

#
# This define keeps track of command line options that are handled by the IDE itself.
# For options that take arguments (-option:<arguments>), add the fixed prefix of
# the the option, e.g. -role:.
#
AddVMOption -Doracle.ide.IdeFrameworkCommandLineOptions=-clean,-console,-debugmode,-migrate,-migrate:,-nomigrate,-nonag,-nondebugmode,-noreopen,-nosplash,-role:,-su

The used jdev.conf is as follows:

#--------------------------------------------------------------------------
#
#  Oracle JDeveloper Boot Configuration File
#  Copyright 2000-2012 Oracle Corporation. 
#  All Rights Reserved.
#
#--------------------------------------------------------------------------
include ../../ide/bin/ide.boot

#
# The extension ID of the extension that has the <product-hook>
# with the IDE product's branding information. Users of JDeveloper
# should not change this property.
#
ide.product = oracle.jdeveloper

#
# Fallback list of extension IDs that represent the different
# product editions. Users of JDeveloper should not change this
# property.
#
ide.editions = oracle.studio, oracle.j2ee, oracle.jdeveloper

#
# The image file for the splash screen. This should generally not
# be changed by end users.
#
ide.splash.screen = splash.png

#
# The image file for the initial hidden frame icon. This should generally not
# be changed by end users.
#
hidden.frame.icon=jdev_icon.gif

#
# Copyright start is the first copyright displayed. Users of JDeveloper
# should not change this property.
#
copyright.year.start = 1997

#
# Copyright end is the second copyright displayed. Users of JDeveloper
# should not change this property.
#
copyright.year.end = 2014

#
# The ide.user.dir.var specifies the name of the environment variable
# that points to the root directory for user files.  The system and
# mywork directories will be created there.  If not defined, the IDE
# product will use its base directory as the user directory.
#
#ide.user.dir.var = JDEV_USER_HOME,JDEV_USER_DIR
ide.user.dir.var = JDEV_USER_HOME_SOA,JDEV_USER_DIR_SOA

#
# This will enable a "virtual" file system feature within JDeveloper.
# This can help performance for projects with a lot of files,
# particularly under source control.  For non-Windows platforms however,
# any file changes made outside of JDeveloper, or by deployment for
# example, may not be picked by the "virtual" file system feature.  Do
# not enable this for example, on a Linux OS if you use an external editor.
#
#VFS_ENABLE = true

#
# If set to true, prevent laucher from checking/setting the shell
# integration mechanism. Shell integration on Windows associates 
# files with JDeveloper.
#
# The shell integration feature is enabled by default
#
#no.shell.integration = true

#
# Text buffer deadlock detection setting (OFF by default.)  Uncomment
# out the following option if encountering deadlocks that you suspect
# buffer deadlocks that may be due to locks not being released properly.
#
#buffer.deadlock.detection = true

#
# This option controls the parser delay (i.e., for Java error underlining)
# for "small" Java files (<20k).  The delay is in milliseconds.  Files 
# between the "small" (<20k) and "large" (>100k) range will scale the
# parser delay accordingly between the two delay numbers.
#
# The minimum value of this delay is 100 (ms), the default is 300 (ms).
#
ceditor.java.parse.small = 300

#
# This option controls the parser delay (i.e., for Java error underlining)
# for "large" Java files (>100k).  The delay is in milliseconds.
#
# The minimum value for this delay is 500 (ms), the default is 1500 (ms).
#
ceditor.java.parse.large = 1500

#
# This option is to pass additional vm arguments to the out-of-process
# java compiler used to build the project(s).  The arguments
# are used for both Ojc & Javac.
#
compiler.vmargs = -Xmx512m

#
# Additional (product specific) places to look for extension jars.
#
ide.extension.search.path=jdev/extensions:sqldeveloper/extensions

#
# Additional (product specific) places to look for roles.
#
ide.extension.role.search.path=jdev/roles

#
# Tell code insight to suppress @hidden elements 
#
insight.suppresshidden=true

#
# Disable Feedback Manager. The feedback manager is for internal use
# only.
#
feedbackmanager.disable=false

#
# Prevents the product from showing translations for languages other
# than english (en) and japanese (ja). The IDE core is translated into
# other languages, but other parts of JDeveloper are not. To avoid
# partial translations, we throttle all locales other than en and ja.
#
ide.throttleLocale=true

#
# Specifies the locales that we support translations for when 
# ide.throttleLocale is true. This is a comma separated list of 
# languages. The default value is en,ja.
#
ide.supportedLocales=en,ja

#
# Specifies the maximum number of JAR file handles that will be kept
# open by the IDE class loader.  A lower number keeps JDeveloper from
# opening too many file handles, but can reduce performance.
#
ide.max.jar.handles=500

#
# Specifies the classloading layer as OSGi. In the transition period
# to OSGi this flag can be used to check if JDev is running in OSGi
# mode.
#
oracle.ide.classload.layer=osgi